Model Description


PURE ELECTRIC FREEDOM

The all new KTM FREERIDE E brings a fresh surge of energy to electric offroad riding. Lightweight, agile, and near silent, it unlocks new possibilities on trails where traditional bikes can't go. Its powerful new drivetrain delivers instant torque, 19.2 kW peak power, and three adaptable ride modes, while the upgraded 5.5 kWh interchangeable battery offers up to three hours of riding freedom. A newly developed chassis, WP XACT/XPLOR suspension, and road legal capability make it equally ready for remote paths or everyday play.

Ride Modes:
The KTM FREERIDE E has three ride modes that suit specific scenarios or performance parameters. Each setting changes the torque and power delivery. Three recuperation settings can be engaged to assist with maximum engine efficiency and battery life: OFF, MID, and HIGH. These can be selected against a specific mode to ensure flexibility with the power package of the KTM FREERIDE E. The ergonomic four-button switch cube on the left handlebar can easily activate the ride modes and other options.

Drivetrain:
Boasting 8,3 kW of nominal output, 19,2 kW peak power, more than 37 Nm of torque and top speed of 95 km/h the engine is resolute water and dustproof unit that is fully integrated into the overall character and agility of the motorcycle.

Display:
The KTM FREERIDE E uses the same LCD dashboard as the KTM EXC enduro range. The resistant display shows a single value at a time to ensure the rider remains fully focused on the route ahead. Thanks to quick contact with two buttons, the options can be cycled. The options are the state of charge, the selected ride mode, and a regenerative map with odometer, clock, trip time, and accumulated run time.

Brakes:
BRAKTEC systems deliver fantastic results with a 260 mm front disc and 220 mm on the rear. Mounting of both front and rear brakes on the NEKEN handlebars is one of the key differences from other motorcycles in the KTM portfolio. The ability to operate both forms of stopping power with two hands allows the user to concentrate more on body stance and foot position.

Frame:
KTM prioritized light feeling and handling, as well as agility, of the KTM FREERIDE E and developed a chassis with the drivetrain and battery at the load-bearing core for a low center of gravity experience. By hinging the chrome-molybdenum steel frame on the engine and battery architecture, the chassis can remain featherweight and slim. The KTM FREERIDE E's seat height is 910 mm.

Suspension:
Thanks to 43 mm WP XACT split design forks, the front end is reactive but also glued and planted when needed. Adjustment is easily made with the single air pressure valve, supplied air pump for preload, and clickers for compression and rebound. The fully adjustable WP XPLOR PDS system provides 250 mm of travel on the rear end.

Safety:
In the case of a tip-over, the KTM FREERIDE E is equipped with a 'roll-over' sensor that cuts the power when tipped over.

Battery:
The 29kg MX50 Lithium-Ion battery has been tested and proven in the most extreme conditions and constructed in a way that means it is interchangeable. Removal from the motorcycle can be performed easily and in less than 10 minutes. The battery is IP67-rated, and its capacity is 5,5 kWh. Nominal voltage registers around the 50 V mark, and the battery life can withstand more than 1000 charge cycles before dipping to 80% SoH. Typical Enduro riding time is estimated to be between 2 and 3 hours.

Charger:
The KTM FREERIDE E comes with a 660 W charger and will complete a full charge in 8 hours with a normal household supply. 20-80% rate can be achieved between 4-5 hours.

Premium Manufacturer's Warranty:
This motorcycle comes with a Premium Manufacturer's Warranty. Riders enjoy up to 2 year of coverage and experience the thrill of offroad riding with added peace of mind. To keep the warranty valid, always follow the guidelines outlined in your motorcycle's Owner's Manual, including using the bike as intended and completing all scheduled services at an authorized KTM dealer. The standard manufacturer's warranty conditions, as specified in the delivery certificate, also remain applicable. More information and details on how to benefit from this offer can be found on the KTM warranty page. Valid from Model Year 2027 onwards for all offroad motorcycles as well as the 450 SMR.

Model Specification


  • Frame

    Chain

    520, Non-sealed

    Frame Design

    Chrome-molybdenum steel frame

    Front Brake

    Disc brake

    Front Brake Disc Diameter Imperial

    Front Brake Disc Diameter Metric

    Rear Brake

    Disc brake

    Rear Brake Disc Diameter Imperial

    Rear Brake Disc Diameter Metric

    Rear Subframe Design

    Aluminium / Polyamide Glass Fiber

    Steering Head Angle

    65.6 °

    Trail

    Wheelbase

    Fehlende Variable

    Front Brake Disc Diameter

    260 mm

    Rear Brake Disc Diameter

    220 mm

    Handlebar

    Pro Taper, Aluminium Ø 28/22 mm

    Tyre Height Front

    90

    Tyre Height Rear

    90

    Tyre Width Front

    90

    Tyre Width Rear

    120

    Brake Disc Diameters Front Rear

    Frame Material

    Subframe Tank

    Tyre Dimensions Front Rear

    90/90; 120/90

  • Engine

    CO2 Emissions

    Cooling

    Design

    Displacement

    Drive Type

    Ems

    Engine Cylinder

    Engine Oil

    Engine Stroke

    Power

    Torque

    37.6 Nm

    Transmission

    Single speed transmission

    Silencer

    Clutch

    Clutch Primary Drive Teeth

    Fuel Mixture Generation

    Charger Line Voltage

    90 - 265 V / 50 - 60 Hz

    Charging Power

    660 W

    Charging Time100

    480 min.

    Charging Time80

    360 min.

    Electric Motor

    50,4 V - PMSM

    Max Power

    19,2 kW

    Rated Output

    8,3 kW

    Traction Battery

    MX50 Lithium-Ion Battery

    Max Motor Speed

    12000 rpm

    Silencer Material

    Silencer Type

    Primary Drive

    Clutch Operation

    Clutch Type

    Engine Addition

    Engine Oil Manufacturer

    Battery Capacity

    110 Ah

    Secondary Gear Ratio

    13:50

  • Suspension

    Front Suspension

    WP XACT USD Fork

    Front Suspension Addition

    Rear Suspension

    WP XPLOR shock absorber with PDS

    Rear Suspension Addition

    Suspension Travel Front Imperial

    Suspension Travel Front Metric

    Suspension Travel Rear Imperial

    Suspension Travel Rear Metric

    Suspension Travel Front

    250 mm

    Suspension Travel Rear

    240 mm

    Rear Suspension Type

    Fork Offset

    20 mm

    Front Suspension Adjustment

    Rear Suspension Adjustment

    Front Suspension Type

  • Dimensions

    Ground Clearance

    360 mm

    Seat Height

    910 mm

    Tank Capacity Approx Imperial

    Tank Capacity Approx Metric

    Weight Fully Fueled

    Weight Without Fuel

    112 kg

    Wheels

    1.60 x 21"; 2.15 x 18"

    Tank Capacity Approx

    Wheelbase Tolerance

    Ground Clearance Imperial

    Ground Clearance Metric